澳昌—百年建筑与设备防护
            高端涂料整体供应商

Home Page > Product Show > Waterproof Repair Coating For Building

                                CPC-Shower Plug

                        Transparent Leak-proof Agent For Bath

                             【Product Manual】

         Product Introduction

           The transparent leak-proof agent for CPC bathroom is developed and manufactured by Australian CPC company. It is a silane nano-permeable w  aterproof material, 

                  which has the most advanced bathroom waterproof repair technology at present, and the penetration waterproof does not affect the luster and texture of tiles. 

                 It has been certified by SGS, an authoritative testing organization, as having no harmful substances, environmental protection and pollution-free, and has also been 

                 recommended by the International Food Organization (MAF) as a designated waterproof repair product for the food production industry.

         Product Performance

                        CPC leak-proof agent adopts breakthrough silane nano-penetration technology, which does not need to move and damage bathroom tiles. A silane nano-protective 

                       layer is formed inside the base material, which effectively prevents tiles and cement layers from leaking downwards, and does not change the appearance and 

                       texture of tile surfaces. Different from conventional waterproof products, CPC leak-proof agent can physically combine with tiles and cement to form a long-lasting 

                       invisible waterproof barrier, which is not just a simple sealing gap surface like waterproof glue, so it will not fail due to wear and tear. The product is durable and 

                       resistant to warm water washing, with a validity period of more than ten years!

         Recommended Use

           Suitable for all kinds of tiles, marble, terrazzo, cement base, etc. It is recommended for hotels, hospitals, bathing places and decoration companies, large 

                  building materials supermarkets, new and old bathrooms, toilets and kitchens in properties, neighborhood committees and families. 

         Product Use Method

                       1. Clean the bathroom tiles before construction, and proceed to the next step after the base surface is clean and dry (you can use a hair dryer to accelerate drying);

                       2. Check whether the cracks in the tiles are aging or not. If the cracks in the tiles need to be repaired in the old bathroom, first mix the jointing powder with 

                      MBA-220 in 1 :1 water to make it sticky, hook all the cracks and wait for drying. Fill carefully, don't miss it, especially the joint between the ground and the wall and 

                     the gap between the tiles. Wait for the gap to dry for 24 hours before the construction of leak-proof agent (new toilet or gap is intact without repair);

           3. Brush all the ceramic tile joints with CPC leak-proof agent first, and then spray or brush them as a whole. Brush 1 meter around and 2 meters in the shower 

                  area. Brush evenly as far as possible, and use normally after natural drying for 24 hours.

                       4. The consumption of CPC leak-proof agent ceramic tile is 20 ~ 30m2/liter, and the actual consumption depends on the water absorption rate of the substrate.

        Special Attention

           A. The possibility of ground water leakage is caused by various reasons. For example, the water leakage caused by the rupture of the pre-buried pipes of water 

                 intake and drainage and the damage of joints and other factors is not within the scope of use of this product.

           B. This product is non-toxic, but it is not allowed to be imported. it is recommended to keep it properly. if you eat it by mistake, please go to the hospital immediately.

           C. If silica gel is applied to the gap of ceramic tile, tear off the silica gel first, and then apply silica gel again after brushing CPC leakage-proof agent for drying to 

                  prevent the ceramic tile from moving and producing cracks.

           D. People can go to the bathroom 12 hours after the product is constructed. Normal use of the bathroom has no effect, but the ground must be kept from getting 

                  wet and wet within 24 hours.

        Product Inmformation

               Shelf Life                    12 months in unopened condition since leaving the factory;

               Packing Spec                  220ml、1L；

               Storage Temperature           5℃~35℃ to ensure storage in a cool environment and avoid direct sunlight;

               Please refer to the latest version of the product technical safety technical instruction manual (MSDS) of Aochang Company for information and suggestions on 

                       product operation, storage and disposal. It includes product physical characteristics, ecological, toxicological data and other relevant safety information data.