Energy-Saving Thermal Insulation CoatingEnergy-Saving Thermal Insulation Coating
Active Practitioner Of Green Environmental Protection And Energy-saving Products
TGA®Transparent Thermal Insulation Coatings For Glass
★Waterproof and Anticorrosion ★Wear protection ★Anti-fouling Self-cleaning
★Heat Insulating ★Fire and Flame Retardan
Product Introduction Of TGA Transparent Thermal Insulation Coating For Glass
1、Importance Of Thermal Insulation For Glass
Glass can give buildings better architectural aesthetics and light transmission function.But in hot summer, glass should absorb at least 70% of solar heat.The external heat
energy can easily penetrate through the glass, which makes the indoor temperature rise, the body feel poor and sultry, and the energy consumption of air conditioning also
rises. In summer, 71% of the solar heat flows into the room through glass; In winter, 48% of indoor heating heat is lost by glass. The heat flux of the wall with the largest
area in contact with the outside air is also 13 ~ 19%; The heat flow of the roof that is most exposed to sunlight is only 6 ~ 9%.
2、Product Introduction
Mechanism of isolating solar heat
Suppose the solar heat shines on the window glass by 100%, it will reflects 5%,the glass surface absorbs 55%.Of the 55%,about 2/3 or
36.7% is reradiated ,and 1/3 or 18.4% remains in the room. In the word,the reflection of 5%plus the radiation of 36.7% is 41.7% cut off.
Test Item | Thickness of Glass 3mm | Reference:Float glass3mm |
Thermal inertia rate(K) | 4.6kcal /㎡h℃(5.3W /㎡ K) | 5.1kcal /㎡h℃(6.0W /㎡ K) |
3、Heat Insulation And Sun Protection
TGA@ transparent glass thermal insulation coating can form a 4~5 micron ultra-thin thermal insulation film on the glass surface as long as it is rolled without affecting the
transparency and beauty of glass, thus achieving the effect of energy saving, thermal insulation and cooling. The coating has high definition, so it also has good hardness,
adhesion, aging resistance, temperature change resistance, freeze-thaw resistance and other properties. With the addition of nano-metal oxide, it strengthens the reflection
function of near-infrared band above 780nm, and the heat insulation and sun protection effect is excellent! TGA@ transparent glass thermal insulation coating can effectively
block 80% of outdoor infrared rays in summer, reduce the temperature of the sunned area by 15~20℃, and reduce the indoor temperature by 6~8℃, saving energy consumption
of air conditioning and refrigeration by more than 40%. After three years of construction, the construction cost can be recovered, and the service life is more than ten years!
4、Energy Saving Test
Four laboratories with the same conditions were set up to test the indoor temperature of the "uncoated room" and the "coated room". The results showed that the
temperature of the coated room (in the middle of the room) was 5~6 degrees lower than that of the uncoated room. The calculation result showed that the air
conditioning fee was reduced by 28% during the year. (Calculated by 10% energy-saving effect of 1℃ change of air conditioning set temperature) The construction
cost can be recovered in 2~3 years.
- Compare the indoor temperature according to the change of the outside temperature. -
5、Energy Saving Effect
Summer---It can block the infrared rays in the sunlight, and can lower the room temperature by 3~7℃, which is equivalent to raising the set temperature of the
air conditioner by 3~7℃. Usually, it can reduce the power consumption by about 64.8kWh per month and save the electricity bill by about 68.03 yuan/month.。
Winter---It can shield the middle and far infrared rays from indoor to outdoor, with a shielding rate of 90%, which can well maintain the room temperature and
reduce the energy-saving effect of heating.
6、Drum Construction Method
7、Product Health And Safety Information
Please refer to the latest version of product technical safety technical instruction manual (MSDS) of TGA company for information and suggestions on product operation,
storage and disposal. It includes product physical characteristics, ecological, toxicological data and other relevant safety information data.
8、Principle Of Good Gaith
TGA promises that all the product data listed above are obtained by testing in relevant laboratories according to corresponding standards. During the test, the
relevant data will be slightly different due to the different test environment and methods. Therefore, TGA company advises customers to do experimental demonstration
before using the product. Except for the product quality itself, TGA Company assumes no responsibility and reserves the right to adjust and update the above data
without prior notice.